Off Line Scenes

Discussion in 'C-Bus Automation Controllers' started by sjfp, Apr 2, 2019.

  1. sjfp

    sjfp

    Joined:
    Oct 31, 2004
    Messages:
    114
    Likes Received:
    0
    Location:
    UK
    Hi, looking for some help.
    Have already sorted the saving of scenes from visualisations but cant see how I can have a way of changing the groups levels in scenes, without effecting the current lighting levels in a room.
    Like having an OFF LINE area to adjust and save scene values. But get used until the next time the particular scene is called.
    Example, a shop store has an OPEN scene which sets lighting cir's 1=50% 2=70% 3=40% etc.
    Then we need to adjust those values to say cir's 1=75% 2=20% 3=80% but they cant effect the current lighting levels in the store until the next time the OPEN scene is pressed.

    Any help would be appreciated.
     
    sjfp, Apr 2, 2019
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.