Non C-Bus Hardware ?????

Discussion in 'C-Bus Wired Hardware' started by pbelectrical, Oct 25, 2004.

  1. pbelectrical

    pbelectrical

    Joined:
    Aug 16, 2004
    Messages:
    121
    Likes Received:
    0
    Location:
    hobart
    Reference the announcement about the use of non c-bus hardware voiding the warranty of ALL network equipment. I'm presuming this does not apply to the hardware used to run home gate (ie can I use a third party touchscreen and not void the warranty).
     
    pbelectrical, Oct 25, 2004
    #1
  2. pbelectrical

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia

    Yes no problem at all, the point of interconnection with the bus is no doubt a Clipsal PCI or CNI.
     
    Duncan, Oct 25, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Use of non Clipsal hardware

  2. Visio shapes for non C-Bus Clipsal gear

  3. Using C-Bus to transport non C-Bus IR?

  4. updating C-bus hardware using old project file

  5. C-Bus hardware supported in 1.9.0

  6. Hardware interface between C-Bus & Niagara BMS?

  7. C-Bus to LED driver hardware

  8. Essential and Non-essential c-bus networks

Loading...