Network Conflicts

Discussion in 'C-Bus Wired Hardware' started by Tonyo, Aug 13, 2004.

  1. Tonyo

    Tonyo

    Joined:
    Aug 4, 2004
    Messages:
    48
    Likes Received:
    0
    Location:
    Canberra
    Can anyone explained to me what network conflicts are? I sometimes get these when I rerun the network installation
    TA
    Tonyo
     
    Tonyo, Aug 13, 2004
    #1
  2. Tonyo

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Network Conflicts are usually caused by 2 things:

    a) Multiple units sharing the same unit address.
    b) Poor network comms.

    Check out these two things and see what you find.
     
    Newman, Aug 16, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Touch via Network Module

  2. Network Interface

  3. Loss of Network Connection Help Needed

  4. Network Problem?

  5. Article Discussion Scanning your first Network

  6. Article Discussion Unravelling a Network

  7. Integration 3 C-bus network and 8 Dali network Problem

  8. How to re-enable network clock when unable to connect to C-BUS network

Loading...