need an example of a Pronto to Cbus

Discussion in 'General Discussion' started by Fliposide, Nov 24, 2008.

  1. Fliposide

    Fliposide

    Joined:
    Jan 21, 2008
    Messages:
    8
    Likes Received:
    0
    Hi all,
    I see that software (post on another) creates a string$ to send from the Pronto, that bit is easy for me, but what do you have to do at the c-bus side?
    I've got a PAC on my system and use it for basic timings and if statements etc. For this to work do you have to set up a COM port and use the Readserial command etc?

    A basic working example would be nice

    Flip.
     
    Fliposide, Nov 24, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Controlling Serial Devices [CIS Example]

  2. LOGIC example for commercial !

  3. simplified join room example

  4. Philips Pronto IR Control of CBus

  5. where is the official example?

  6. Link to Example : RTI to PAC Interface via serial

  7. TCP/IP Example [CIS Example]

  8. Wiser and Pronto or Switch Automation Pronto

Loading...