NAC auto login

Discussion in 'C-Bus Automation Controllers' started by Diggerz, May 3, 2019.

  1. Diggerz

    Diggerz

    Joined:
    Jan 24, 2017
    Messages:
    43
    Likes Received:
    7
    Location:
    Australia, Melbourne
    I was wondering if anyone has implemented any sort of auto login for the NAC.

    Most web browsers are no longer supporting the http://user:password@url anymore so I was wondering if anyone had a work around?

    The auto user login would be to allow the user access to the visualisation page.

    An admin login would still be used for access to configuration.

    Obviously this is not very secure but the network will be a closed Vlan. I guess secondly is there an way to implement this securely?
     
    Diggerz, May 3, 2019
    #1
  2. Diggerz

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    You can turn off the password or pin for the visualization page. Just log into the configurator, select the user access tab and then select user access setting at the bottom of the page.
     
    Ashley, May 3, 2019
    #2
    Mr Mark likes this.
  3. Diggerz

    lcrowhurst

    Joined:
    Dec 2, 2004
    Messages:
    271
    Likes Received:
    97
    Location:
    Sydney, NSW, Australia
    You can use my app goto crowhurst.com.au
     
    lcrowhurst, May 5, 2022
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Auto Login not working?

  2. Auto-connect Toolkit to remote cgate

  3. ServerX Login

  4. Color C-Touch Auto reset

  5. SSH or Telnet Login via logic

  6. Wiser 2 Remote Login on Apple

  7. RGB Auto Colour Changing with NAC

  8. User name and login fail

Loading...