Multiple Interfaces

Discussion in 'C-Bus Wired Hardware' started by Jesmond, Sep 1, 2006.

  1. Jesmond

    Jesmond

    Joined:
    May 18, 2005
    Messages:
    107
    Likes Received:
    0
    Location:
    Victoria
    Hi Guys,

    In my recent quest for details on devices which can communicate with cbus etc I have found a touchscreen and alarm panel (from different suppliers) who say their product can communicate with CBUS via the PCI.

    So this would mean I would have a PCI for the alarm, PCI for the touch screen and a PCI for programming. Is this right? Can there be any problems using this approach ?

    Any suggestions or advise would be appreciated.

    Regards
     
    Jesmond, Sep 1, 2006
    #1
  2. Jesmond

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    Most likely each device would require their own PCI. There should be no porblems with this setup.
     
    Richo, Sep 1, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Multiple groups

  2. Adding multiple units

  3. New HomeGate, multiple networks??

  4. Wanted Minder IO interfaces

  5. Multiple CBUS interfaces on one PC?

  6. How many Crestron interfaces at the same time?

  7. PCI RS232 Interfaces

  8. NEO, multiple timers on multiple keys, same group

Loading...