Multi Room Audo GA Tempate Adresses

Discussion in 'Multi-Room Audio (MRA) and MARPA' started by Mr CBUS, Feb 24, 2014.

  1. Mr CBUS

    Mr CBUS

    Joined:
    Jan 7, 2014
    Messages:
    6
    Likes Received:
    0
    Location:
    Brisbane
    Hi could someone please post a link to a clipsal document that lists
    all the standard templated group address and levels that are used with cbus mutli room audio.

    Eg if I hade 16 zones with 16 sources with full control.
    I'm assuming something like GA01-G16, Level 01-16 for source selection per zone with level 0 off,
    GA101-116 Volume Control, GA201-216 for source control.

    Do people typically save a DLT/eDLt as a template file to load into every keypad per job and edit the allocated button group address per AV zone, then change the names of dynamic labels on that job ?
     
    Mr CBUS, Feb 24, 2014
    #1
  2. Mr CBUS

    Roosta

    Joined:
    Nov 22, 2011
    Messages:
    560
    Likes Received:
    1
    Location:
    Australia
    There is no standard as far as I am aware.. Its much the same as the rest of CBUS, whereby everyone seems to have their own way of doing things..

    I tend to do each zone amp seperately, and then the zone control, followed by the touchscreen/wiser/higher level control..
     
    Roosta, Feb 25, 2014
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus Multi Room Audio

  2. Multi Room Audio

  3. Multi Room Audio

  4. Multi Room Audio IR via distribution Unit

  5. Multi Room Audio Amplifiers Power supplies

  6. Multi Room Audio Broad Cast Inputs

  7. How to make scenes with more than 100 group adresses...

Loading...