Multi Room Audio IR via distribution Unit

Discussion in 'Multi-Room Audio (MRA) and MARPA' started by Charlie Crackle, Dec 21, 2005.

  1. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    Multiroom Audio
    IR hardware question


    If you have a distribution Unit connected to the Matrix switcher via the Digial audio Input. If you connect up the IR emmiter on the distribution unit what comes out ??

    1) Nothing

    2) IR signals that are repeated from the IR targets on any amps connected to the Matrix switcher

    3) the IR signals programmed with Marpa that normally come from the Matrix switcher IR outputs in response to cbus group addresses

    4) Combination of 2 and 3


    Charles
     
    Charlie Crackle, Dec 21, 2005
    #1
  2. Charlie Crackle

    Matty

    Joined:
    Oct 15, 2004
    Messages:
    131
    Likes Received:
    0
    Distribution unit

    Number 2.

    Regards,
    Matty
     
    Matty, Dec 21, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus Multi Room Audio

  2. Multi Room Audio

  3. Multi Room Audio

  4. Multi Room Audio Amplifiers Power supplies

  5. Multi Room Audio Broad Cast Inputs

  6. Multi Room Audio amps

  7. Powering the 56001 Audio Distribution Unit.

Loading...