MRA and Edlt

Discussion in 'Multi-Room Audio (MRA) and MARPA' started by Bodhi, Oct 24, 2017.

  1. Bodhi

    Bodhi

    Joined:
    Jul 8, 2016
    Messages:
    9
    Likes Received:
    0
    Location:
    Gloucester
    Hi All,
    Still quite new to this and still learning.
    would like to ask, does anyone have any instructions on programing the EDLT to control amps ie volume, bass etc
    using a matrix with 5 MRAs ?

    Thanks in advance
    Bodhi
     
    Bodhi, Oct 24, 2017
    #1
  2. Bodhi

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    It's pretty straightforward..

    The eDLT supports a single MRA zone.

    There are a bunch of different MRA widgets... Volume, Treble, Bass, Source Select, Source Control.

    You just need to configure the Matrix Switcher number and Zone Number.

    Nick
     
    NickD, Oct 25, 2017
    #2
    Bodhi likes this.
  3. Bodhi

    Bodhi

    Joined:
    Jul 8, 2016
    Messages:
    9
    Likes Received:
    0
    Location:
    Gloucester
    Sorted it now through trail and error,. Problem was speakers weren?t connected properly.... terminals not making onto copper only on sleaving ..... also at the moment I have only a iPhone playing through matrix via 3.5 jack and the volume is very low ....have turned up volume in MRA but still very low ....thanks for the reply
    Lee
     
    Bodhi, Oct 27, 2017
    #3
  4. Bodhi

    702AV

    Joined:
    Oct 31, 2017
    Messages:
    7
    Likes Received:
    1
    Location:
    United States
    Bodhi

    I'm new to this as well! Difference is I'm working with 3 MRA and running 12 amps one for each zone, if I'm correct, the MRA is a controller only with no amplication built in.
     
    702AV, Nov 3, 2017
    #4
    Bodhi likes this.
  5. Bodhi

    Bodhi

    Joined:
    Jul 8, 2016
    Messages:
    9
    Likes Received:
    0
    Location:
    Gloucester
    have been advised to use Marpa, which I have downloaded and unpdated settings and still issues persist, low volume and all zones have sound at the same time, no doubt it will be something simple
     
    Bodhi, Nov 9, 2017
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 06-041-1 MRA And Labels

  2. MRA and PICED

  3. MRA and the Future

  4. Wiser and MRA widgets

  5. eDLT and Short Press Toggle with Long Press Start Timer

  6. MRA and External Amplifiers

  7. MRA Amps with no MRA switcher

  8. MRA and wiser 2

Loading...