METechs motorized curtain rods CL200T and roller shade blinds CL338H can be controlled by C-bus

METechs motorized curtain rods CL200T and roller shade blinds CL338H can be controlled by C-bus and other controllers with dry relay contacts:
METechs CL200T curtain motor can be easily integrated into any automation control systems or controllers. It takes three relay (dry type) inputs and share common and no external power needed. Four wires: OPEN, CLOSE, STOP, and COM. The wire can be wired into telephone plug 6P4C RJ14 or RJ25 6P6C. The plug can be directly plugged into our motor manual port. Any controller with dry outputs can directly control the motors, or convert these outputs into relay type interfaces, and then control our motors.
Its remote also can be learned by most universal learning remote and controllers. It is also can be directly code to some controller. Motor also accept 38KHz coded IR signal.


CL338H, CL338HZ, and CL338T motor kits are truly a core part of your home automation or smart home. Built in third party controlling interface makes it easy to integrate into other controllers, like METechs Smart Home Hub, Control 4, PLC, Insteon, Zigbee, Z-Wave, X10, and others via dry contact realys or add-on modules. It can be controlled by remote (included), control pad (included), wall switches, METechs timers, third party controllers, and smart phones and tablets with add-on module. It can also be controlled with most universal learning remotes.