Metal Halide light switching

Discussion in 'General Discussion' started by Stets, Jul 4, 2008.

  1. Stets

    Stets

    Joined:
    Jul 18, 2007
    Messages:
    6
    Likes Received:
    0
    Hi All,

    I want to control my metal halide tennis court lights through my C-Bus system in order to use the re-strike delay feature.

    At the moment I have 2 channels spare on the L5512RVF.

    As the lights are 1500W each (6.25A each) I intend to have each of the spare channels switching a DPDT 16A relay which in turn will switch 2 of the metal halide lights.

    This will of course all be wired up by a sparky but I just wanted to check whether it was OK to use the C-Bus relay in this application.

    TIA

    Stets
     
    Stets, Jul 4, 2008
    #1
  2. Stets

    ICS-GS

    Joined:
    Nov 1, 2004
    Messages:
    347
    Likes Received:
    0
    Location:
    SE Melbourne
    can't see a problem with that:cool:
     
    ICS-GS, Jul 4, 2008
    #2
  3. Stets

    Stets

    Joined:
    Jul 18, 2007
    Messages:
    6
    Likes Received:
    0
    Cool, Thanks :)
     
    Stets, Jul 8, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 5751L bedroom switching

  2. Newbie Programming dual switching

  3. Random Switching

  4. metal halide

  5. help metal halide

  6. Metal Halids Run Off Dimmer as Substitute Relay?

  7. Cbus Light sensor switching metal halide lighting

  8. CBus light switch no longer turns off light

Loading...