Max writes on c-touch

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by muppets, Jan 25, 2009.

  1. muppets

    muppets

    Joined:
    Oct 26, 2007
    Messages:
    98
    Likes Received:
    0
    I know that there is a max number of writes to a c-touch listed somewhere in a document - but is there a location that tells me how many writes a c-touch has actually received?
     
    muppets, Jan 25, 2009
    #1
  2. muppets

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,392
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    Actually received... as in times firmware updated. No.

    The old C-Touch Mk 1 had an endurance of 1000 erase/write cycles, that is to say, you can update the firmware 1000 times. This is guaranteed by the chip maker, meaning that in practice (so they don't get a bunch of returns) you will get a lot more than that.

    Sometime during the production lifetime of the CTouch Mk1 that was increased to 10,000 erase/write cycles. This is probably about 5 years ago.

    C-Touch Mk2 (the one currently available, the Mk1 being discontinued) has an endurance of over 1 million cycles.

    To put this in context: If you had a CTouch Mk1 and you updated it once every working day of the year (220 times) then it would last a least 4.5 years, and most likely significant more than that.

    In practice, thats not going to happen. A CTouch Mk1 might normally be updated, at most, a couple of hundred times during a 10 to 15 year installed life. (That case is equivalent to doing an update roughly once a fortnight, every fortnight, for the 10 - 15 year period.)
     
    ashleigh, Jan 25, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.