Logic Engine Stop running??

Discussion in 'Pascal Logic Code Examples' started by wanricky, Sep 12, 2005.

  1. wanricky

    wanricky

    Joined:
    Sep 12, 2005
    Messages:
    219
    Likes Received:
    0
    I have a simple logic for partition control running with a Pascal Controller. I also use that controller as my program interface (i.e. no PCI). However, it seems that the logic engine stops running every time I download changes using toolkit. (I am no sure but the logic doesn't respond anymore)

    Since I have no idea how to "re-activate" the logic engine, I re-load the logic program file to make it run again.

    Do I miss something fundermental in using logic engines?
     
    wanricky, Sep 12, 2005
    #1
  2. wanricky

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    When you use the PAC as a PCI it stops operating as a PAC (it can't do both at the same time). To let the PAC know to resume behaviour as a PAC unplug the USB cable and the PAC will resume running the logic.
     
    Richo, Sep 12, 2005
    #2
  3. wanricky

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    This is covered in the FAQ.
     
    Darren, Sep 13, 2005
    #3
  4. wanricky

    wanricky

    Joined:
    Sep 12, 2005
    Messages:
    219
    Likes Received:
    0
    Thanks, I think I missed that part. It's just my common habit to unplug programming cable after verifying the whole system.
     
    wanricky, Sep 13, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.