Log file - information required...

Dear all,

Below is a portion of the log file taken from the Schedule+,

6/18/2009 8:17:45 AM C-Gate : Rx "lighting on //HOLIVILL/254/56/185 #sourceunit=57 OID=fb4cd080-095e-102c-8959-f62fd68420d6"
6/18/2009 8:17:45 AM C-Bus Rx : Set H_MEZ_A_COVE_EMERALD_2 On
6/18/2009 8:17:45 AM C-Gate : Rx "lighting on //HOLIVILL/252/56/185 #sourceunit=-1 OID=0eeaa5e0-3245-102c-9ea6-e5e712dd9365"
6/18/2009 8:17:45 AM C-Bus Rx : Set BUILDINGS_5_6_7_8, Group 185 On
6/18/2009 8:17:45 AM C-Gate : Rx "lighting on //HOLIVILL/253/56/185 #sourceunit=-1 OID=0f0755a0-3245-102c-9ea7-e5e712dd9365"
6/18/2009 8:17:45 AM C-Bus Rx : Set BUILDINGS_1_2_3_4, Group 185 On

i am intended to switch on the GA - H_MEZ_A_COVE_EMERALD_2 only, am i did anything wrong in the addressing? This is happening for all the messages i am sending from the Local network.

We are receiving "time change" message once in a while, is this due to any difference in the time set in the Computer - where S+ resides and the time set in C-Touch?

Regards,

Rakesh

 

It looks like you have bridges which are sending the messages to adjacent networks 252 and 253. C-Gate is reporting that the messages have gone to these networks too.

C-Touch (and other devices) will send time messages to C-Bus on a regular basis. The PC time will be changed only if you have the Enable Time Synchronisation option selected.

See the FAQ topic C-Bus Unit Clocks.