Link IO's between Wiser and C-Touch

Discussion in 'C-Bus Wiser 1 Controller' started by muppets, Jun 5, 2011.

  1. muppets

    muppets

    Joined:
    Oct 26, 2007
    Messages:
    98
    Likes Received:
    0
    Is there any way other than some extensive logic to link IO's between the Wiser and the C-touch (I want to link the IO that is used for the A/C setpoint)?
     
    muppets, Jun 5, 2011
    #1
  2. muppets

    kjayakumar

    Joined:
    Oct 27, 2008
    Messages:
    448
    Likes Received:
    0
    The Wiser has HVAC support so you should be able to set the setpoint using the Adobe Flash UI and see it reflected on the CTouch.
     
    kjayakumar, Jun 5, 2011
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Oassing messages between PAC , Homegate and CTS

  2. Difference between L5508D1A and L5508D1AP

  3. scene triggering between C-Touch and switches

  4. Status indicators between B&W Touch & Schedule Plus not correctly

  5. Creating a wireless link between 2 wired networks

  6. Wiser and D-Link IP Cameras

  7. Page Link with Sub Page Link

  8. Clipsal Wiser Link

Loading...