Line level volume

Discussion in 'Multi-Room Audio (MRA) and MARPA' started by ben addison, Aug 11, 2018.

  1. ben addison

    ben addison

    Joined:
    Aug 8, 2004
    Messages:
    62
    Likes Received:
    1
    Location:
    Sheffield
    Hi,

    I install a v3 black matrix a couple of years ago and tried a number of inputs, airport express, iPhone and blu Ray. And they all had a low gain on the matrix.
    I tried to adjust the gain on the matrix and still couldn’t get much volume out of the speakers.

    I have installed another matrix a couple of months ago. We came across the same thing. If we use optical in then the volume. Is fine.

    We then got a call from another Cbus installer and they was asking the same thing about the volume out.

    Is this a known problem or is there something we need to change.

    Thanks
     
    ben addison, Aug 11, 2018
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus Telephone Interface, clicks on the line?

  2. CBUS to X10 or other power line

  3. PICED serial port default line states

  4. Why cannot paste scene in specify sence line in "Scene Manager" window

  5. C-Touch On/Off line

  6. CIS Technical - line doesn't work

  7. US line discontinued ?

  8. Line-up

Loading...