Lights unable to off completely

Discussion in 'General Discussion' started by Kiren, Nov 25, 2020.

  1. Kiren

    Kiren

    Joined:
    Nov 25, 2020
    Messages:
    1
    Likes Received:
    0
    replaced new bulbs at master bedroom, found that both c-bus and conventional cct breakers trip. After reset both breakers and switch on the lights, everything fine. But when switch off, the lights unable to off completely.
     
    Kiren, Nov 25, 2020
    #1
  2. Kiren

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    I assume you have replaced incandescent bulbs with leds. This is a known/common problem with many (generally cheap) leds on phase control dimmer. It has been discussed at length on these forums and others. Just search here for 'led lighting'
     
    Ashley, Nov 25, 2020
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. All lights off

  2. How can I turn all lights off?

  3. C-Bus PIR's not turning lights off every time.

  4. Lights not turning completely off

  5. Scheduling lights on and off

  6. Lights on but all channels off

  7. Lights on and off but no bus message

  8. turn on/off a the lights off network (1)from a keypad in the network(2)

Loading...