Life span of Network Bridges

Discussion in 'General Discussion' started by Suza, Jul 27, 2012.

  1. Suza

    Suza

    Joined:
    Jul 27, 2012
    Messages:
    1
    Likes Received:
    0
    Location:
    Vic
    Hi all,
    I look after a venue that has 16 network bridges all Clipsal 5500nb. The relays are 2 channel. There are two cni units. The system was installed in y2k. We upgraded system to cbus version 2 about 3 years ago.
    Lately we have been changing out the brides due to networks being degraded. The Bridges are approx. 5 years old. Does this seem to be a short life span for the units?
    We seem to have a problem with the networks every couple of weeks.
    Could there be a communication or power supply issue.
    Any advise would be appreciated.
     
    Last edited by a moderator: Jul 27, 2012
    Suza, Jul 27, 2012
    #1
  2. Suza

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,151
    Likes Received:
    17
    I hope this is not the case.

    Mine has been running for about 9 years now with no issues (knock on wood). Its in a panel in a room in the shed that can get quite warm so its not the "best" environmnet for it [temperature wise].

    As long as I can keep the mice away from it (they have killed two 12ch relays now) I hope it will continue for a lot longer.

    Mick
     
    znelbok, Jul 30, 2012
    #2
  3. Suza

    massoud

    Joined:
    Aug 13, 2011
    Messages:
    1
    Likes Received:
    0
    Location:
    Adelaide
    can contact CIS tech support 1300 722 247
     
    massoud, Aug 2, 2012
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.