Left field Question - GPO with seperate mech for MQTT and C-Bus

Discussion in 'General Discussion' started by znelbok, Jan 9, 2018.

  1. znelbok

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,061
    Likes Received:
    4
    So now there is a MQTT and node red option for C-bus, I want to try an IoT GPO using a Sonoff with updated firmware to utilize MQTT.

    The problem I have is I cant find a GPO with a separate mech - they are all built into the unit. The reason for this is that there are momentary mech with LED's and the Sonoff has a push button input for turning the output on and off manually (with MQTT broadcasts). The LED is driven by another output on the onoff so the idea is that the LED on the mech will indicate that state of the GPO and it can be controlled by either a MQTT message - from a C-bus group, or the button.

    Anyone know of a GPO with separate mech?

    Does any of the Clipsal iconic range have BTLE in the GPO's to do a similar thing - a "bridge between C-Bus and iconic swithces could potentially be a solution
     
    znelbok, Jan 9, 2018
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.