LED Indication on "All Off" switch

Discussion in 'C-Bus Wired Hardware' started by 53hdt, Jul 21, 2007.

  1. 53hdt

    53hdt

    Joined:
    Jul 21, 2007
    Messages:
    2
    Likes Received:
    0
    Hi,

    I've heard there is a way to have the LED on a switch that is programmed as an "all off" (using area addresses of dimmer/relay units), indicate if there are any lights on at all in the areas assigned by the all off.

    At the moment the button in question never has the LED lit.

    Does anyone know how to achieve this?

    Thanks,

    Chris
     
    53hdt, Jul 21, 2007
    #1
  2. 53hdt

    pbelectrical

    Joined:
    Aug 16, 2004
    Messages:
    121
    Likes Received:
    0
    Location:
    hobart
    Set to level of group.

    Try this - open the GUI for the switch in question, select the indicators tab.

    Then select the option for level of group, select from the drop down box the group address for your area command.

    Never tried this myself as i usually use scenes to do all off and trigger them from a switch set as a bell press.
     
    pbelectrical, Jul 21, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. All Off

  2. all off via scenes

  3. All off Button on saturn wireless for 25 loads

  4. Monochrome Touch Screen ALL OFF

  5. Program an all off button

  6. All Off Scene using a wireless system

  7. All off for switch group query????

  8. Disable PIR and switch with scene, then enable again with all off

Loading...