iRidium Server software as C-Bus universal gateway to many protocols

Discussion in 'Third-Party Solutions' started by nickrusanov, Apr 26, 2016.

  1. nickrusanov

    nickrusanov

    Joined:
    Aug 5, 2004
    Messages:
    308
    Likes Received:
    0
    Location:
    russia
    I tried to use Cytech KNX interface, but could not send 2byte temp value from KNX to C-Bus and some other things. Then I started to search for another solution and found a very good one.

    Just tried to make a simple system with C-Bus, KNX, HDL Buspro and Modbus protocols inside. Here is a 2 min video of how I set up some connections:

    video

    iRidium Server for windows/linux is free to use in Test Mode which needs project reupload every 7 days
     
    Last edited by a moderator: Apr 27, 2016
    nickrusanov, Apr 26, 2016
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Dimmer relays - how many amps!?!?

  2. Too many long constants - What The !!!

  3. How many copies of Homegate needed ?

  4. Announcement: Clipsal to publish the C-Bus serial protocols for free use

  5. Software to convert OPC AE server to OPC DA server

  6. "iRidium for Clipsal" announcement

  7. Master New Software, iRidium for Clipsal, FREE

  8. Translink C-Bus Gateway Achieves "C-Bus Enabled" Certification

Loading...