Intermittent Communication

Hi all,

I have two c-bus networks liked via bridge. Each network consists of 1 burden and 3 clocks. First network has C-Touch 2 with logic engine which is used to communicate with all 3 networks.

The current issue which is being experienced is when C-Touch tries to communicate with devices on network 2 the outputs sometimes turn on and sometimes dont. Even when the outputs are on frequently when trying to turn them off the same issue happens. Likewise when talking to Application groups on the second network.

I have tried going through all the configurations and am not able to spot anything wrong. Network is approx 1km long and hence why the bridge was used. There are enough power supplies on the network.

Any help would be much appreciated.

Regards

SS