intergrate nuvo audio system with c bus

Discussion in 'General Discussion' started by penny, Oct 31, 2005.

  1. penny

    penny

    Joined:
    Jun 25, 2005
    Messages:
    7
    Likes Received:
    0
    Location:
    sydney
    has anyone tried to intergrate the "nuvo" essentia multi-source home sound system with cbus

    the write up says that it has a bidirectional rs 232 port

    i would prefer to use a DLT rather than their own wall controller
     
    penny, Oct 31, 2005
    #1
  2. penny

    Phil.H

    Joined:
    Jul 29, 2004
    Messages:
    466
    Likes Received:
    0
    Location:
    Sydney
    232

    Penny your post mentions "the write up says that it has a bidirectional rs 232 port" if this is referring to the unit you are looking to integrate then you could match this with the new PAC controller which has two RS232 ports. You will need to get your hands on reference re RS232 connection and control messages for the unit you are interested in integrating with C-Bus. Once you have this info drop a line back here in the forum and we can steer you in the right direction. :)
     
    Phil.H, Nov 2, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus Multi Room Audio

  2. Multi zone audio is c-bus the go!!!

  3. Should I use c-bus multi-room audio system?

  4. Netstream Audio Video System with CBus

  5. Dimmer induced noise in audio system

  6. Integrate with 3rd Party Audio Control System

  7. switching audio with ELV

Loading...