Inner range isight - self test

Discussion in 'C-Bus Automation Controllers' started by Cheater, Sep 16, 2024.

  1. Cheater

    Cheater

    Joined:
    Sep 16, 2024
    Messages:
    1
    Likes Received:
    0
    Location:
    POLAND
    Hello, i use IR concept 4000. I have questions:
    1. How to do zone step test? Can I ask for step by step instructions?
    2. How to do walk test.
     
    Cheater, Sep 16, 2024
    #1
  2. Cheater

    daz

    Joined:
    Dec 26, 2024
    Messages:
    1
    Likes Received:
    0
    Location:
    Australia
    gday,

    at a terminal, installer code > ok > menu > 4 > 1 gets you to the INPUT TEST page.
    it defaults to C01:Z01, but you can use the cursor > v < ^ & alpha numeric keys to create any valid input.
    when the correct input is displayed press OK and live status of the chosen input is shown.
    walk test the physical input & live status should change & terminal will beep.
    press END several times to exit & logout.
     
    daz, Dec 26, 2024
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. test msg

  2. Test Command Not Working

  3. Emergency Lighting Test Sw

  4. Please test Media Center control from Homegate

  5. Self wiring?

  6. B&W Mk2 Restarting it self

  7. New Inner Range "Integriti" system being rolled out now.

  8. Lights coming on by them self.

Loading...