I found a bug in ToolKit.

I set a Expiry time for PIR Day Move function of 5753PEIRL.
Only value 30sec is not stored in database.
It is stored in 5753PEIRL unit.
But the value in ToolKit was backed to zero when 5753PRIEL window is reopened.
This bus occurs on ToolKit 1.5.2, 1.6 and 1.6.1.

Regards,

Yoshi

 

Hi Yoshi,

could you provide more specific steps. What dialogs you saw and options you chose.

 

Hi Richo,

It is easy to reproduce in my environment.
Select a 5753PEIRL and click then open a configuration window.
Click Reset Unit button at bottom of window.
Arrange a group for Virtual Key 1 Group.
Click a tab of PIR Day Move then set a Expiry time 0 hours 0 mins 30 secs.
Close 5753PEIRL windows to click OK buttons.
Occupancy function is working fine. Light was going off when after sensing.
Select the 5753PEIRL in ToolKit.
Check the Expiry time was backed to zero.
Close 5753PEIRL windows to click OK buttons.
Occupancy function is working, because light was turned ON, But the light never turn to OFF.
This symptom only occurs on Expiry time 0 hours 0 mins 30 secs.

Regards,

Yoshi

 

Thanks Yoshi,

I added this to our defects database. Issue #10412.

Cheers,
George