How to see all units?

Discussion in 'C-Bus Toolkit and C-Gate Software' started by DaleS, Nov 22, 2013.

  1. DaleS

    DaleS

    Joined:
    Nov 17, 2011
    Messages:
    33
    Likes Received:
    0
    Location:
    Melbourne
    I've got a couple of items linked together - a 4 port dimmer, ethernet module, PAC and two switches.

    When I look/rescan devices on the network I only see the two switches as well as a 5500PC! (a serial port which isn't on the network).

    I had set up the lights manually before getting the ethernet module going (to switch outputs on the dimmer) and can do this from C-Bus Toolkit.

    Should Toolkit show up the other items (and correctly display the ethernet module?), and if so how can I get them to see them?
     
    DaleS, Nov 22, 2013
    #1
  2. DaleS

    rikaussie

    Joined:
    Jun 8, 2013
    Messages:
    68
    Likes Received:
    2
    Location:
    Melbourne
    Have you checked to make sure you have one burden on the network?
     
    rikaussie, Nov 23, 2013
    #2
  3. DaleS

    DaleS

    Joined:
    Nov 17, 2011
    Messages:
    33
    Likes Received:
    0
    Location:
    Melbourne
    Problem was two items on the network with address 1.

    Thanks for your help - it got me to track the error down.
     
    DaleS, Nov 25, 2013
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Gate will not see COM2 under XP

  2. How does it all work

  3. How to rescue your network when all C-Bus clocks are turned off

  4. All wireless units in range ??

  5. Are we ever going to see these great energy management products??

  6. Can anybody see the fault with this PICED logic?

  7. Flash is dying. When will we see HTML5?

Loading...