How to map Scene from SHAC to eDLT button

Discussion in 'C-Bus Automation Controllers' started by ampcom, Jun 18, 2018.

  1. ampcom

    ampcom

    Joined:
    Jul 19, 2014
    Messages:
    24
    Likes Received:
    0
    Location:
    Sydney, Australia
    Hello all,

    Just needing to know how to map a Scene created in the SHAC to an eDLT button.

    I have created Trigger Group Lounge Blinds.
    Created 3 x Action Selectors being 0% All Close, 2% All Stop & 100% All Open.

    In the eDLT Key Settings properties the "Scene" properties I could not see the Trigger Group I had created in the SHAC.

    I did "Sync to Unit" which I understand may not send / update in Toolkit but only save to the SHAC.

    Any help will be appreciated.

    Thank you,
    Philip
     
    ampcom, Jun 18, 2018
    #1
  2. ampcom

    ampcom

    Joined:
    Jul 19, 2014
    Messages:
    24
    Likes Received:
    0
    Location:
    Sydney, Australia
    Sorry, I found out I needed to Export Toolkit CGL file from the SHAC then imprt to Toolkit.

    Cheers,

    Philip
     
    ampcom, Jun 18, 2018
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Topology map/16bit subsystem and toolkit 1.1.5

  2. How to toggle a Scene ON/OFF with 1 button ?

  3. How do I trigger a scene in a wireless Wall plug from wired key button?

  4. Toggle a scene from one DLT button?

  5. fan control from single button - How?

  6. How to toggle scene from one dlt button

  7. Triggering SHAC scenes from EDLT

  8. Controlling Big Ass Fans Haiku fans from C-bus with SHAC

Loading...