How to connect television/LCD/LED to c-bus?

Discussion in 'General Discussion' started by mimi, Jan 16, 2017.

  1. mimi

    mimi

    Joined:
    Jan 16, 2017
    Messages:
    1
    Likes Received:
    0
    Location:
    oman
    is it done by any sensor or transmitter??
     
    mimi, Jan 16, 2017
    #1
  2. mimi

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,151
    Likes Received:
    17
    Depends on the TV.

    If it has a serial port (like a lot of LG and Sharp TV's) then you can use that and query the power status.

    There are sensors that can sit on the composite video output port (if they still exist on a TV) to detect voltage there or a light sensor over the power LED.

    Another option is a current switch. TV draws more current when on.

    Just google around a bit and see what you can find. anything with a digital output can then be connected to an aux input module or similar to drive a C-Bus group.
     
    znelbok, Jan 16, 2017
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to connect 5500PC PCI to your com and to the network(C-bus 2 or ToolKit)?

  2. how to connect a CBus relay to a TP of 20A

  3. How to connect a Single Channel Relay

  4. how to connect 5500PC to computer vir computer network

  5. How to connect mecanichal key card to cbus

  6. How to connect C-Bus to PC.

  7. IP Control of Samsung's LED/LCD/Plasma?

  8. How to re-enable network clock when unable to connect to C-BUS network

Loading...