How to catch the event "Stop" on the Shutter Relay

Discussion in 'C-Bus Wired Hardware' started by Dee_69, Jul 30, 2013.

  1. Dee_69

    Dee_69

    Joined:
    Jul 29, 2013
    Messages:
    3
    Likes Received:
    0
    Location:
    Moscow, ru
    Hello!
    The Shutter Relay (L5501RBCP) is controled by the key on the DLT using the function "Shutter Toggle". I need to catch the event when shutter has stopped.
    Relay ramps to level 249 (98%) when the key is pressed, regardless of whether a command is sent to the open, close or stop.
    How do I know that the shutter has stoppped?
     
    Dee_69, Jul 30, 2013
    #1
  2. Dee_69

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    Unfortunately the shutter relay provides no feedback as to its state so what you want isn't possible.
     
    Ashley, Jul 30, 2013
    #2
  3. Dee_69

    Robbo_VIC

    Joined:
    Jan 24, 2011
    Messages:
    142
    Likes Received:
    0
    Location:
    Melbourne, VIC
    If you need to make sure the shutter has stopped, you could program a 2% command (stop) to a long press
     
    Robbo_VIC, Jul 31, 2013
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How can I stop Minder being the clock Source ?

  2. Anyone installed the Shutter Control Relay yet?

  3. Using Using a Shutter Control Relay as a Change over Relay

  4. Shutter control without shutter relay.

  5. Enclosure for the L5501RBCP SHUTTER RELAY

  6. Countdown to event "how many minutes left"

  7. Shutter Stop

  8. Difference between a shutter relay and change over relay

Loading...