Help with sunset function on PIR

Discussion in 'General Discussion' started by ss1987, Sep 8, 2025 at 10:27 PM.

  1. ss1987

    ss1987

    Joined:
    Apr 9, 2022
    Messages:
    27
    Likes Received:
    1
    Location:
    Melbourne
    Hi all. I'm hoping someone can assist with this problem I'm having as it's got me completely stumped.
    I have an external PIR used for sunset switching of multiple groups and has worked fine since I implemented it.
    However, I recently added some new external lights and added an additional group to be switched on via the sunset switch (titled shed festoon lights).
    After doing this, for some reason virtual key 1 and virtual key 2 no longer trigger at all when the sunset switch is activated.
    I checked the application log and when the sunset switch is triggered, it only activates virtual key 3, 4 and 5.
    It just so happens that the groups which are not turning on happen to be on dimmer channels so I'm not sure if that could be related. The groups switch on no problem via a switch.
    Photos attached for reference.

    Key Functions.png Blocks.png Log.png
     
    ss1987, Sep 8, 2025 at 10:27 PM
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Sunset Function on SENPILL and Light Level of 77 LUX goes 0 when Occupancy Enabled

  2. PIR Sensor (Sunset and Occupancy)

  3. Anyway to rescan or retrigger sensor sunset function?

  4. Issues with Sunset function on Multi sensor.

  5. Sensor Sunset light function lights flashing

  6. Help With Dimmer Key Function Behavior (Toggle vs Memory vs Others)

  7. Convert dim function to on/off function on dim set L5508D1AP

  8. Timer function with dimming control and PIR retrigger

Loading...