Help with CBus2 Interfase with Crestron

Discussion in 'General Discussion' started by DanielF, Jan 9, 2006.

  1. DanielF

    DanielF

    Joined:
    Sep 5, 2005
    Messages:
    18
    Likes Received:
    0
    Location:
    Buenos Aires, Argentina
    Hi all
    We are pretty new with CBus2 and we would appreciate some help on how to connect more than 2 Crestron wireless LCD devices to a 5 network CBus implementation, including local and remote areas.

    We know how the physical interface works but we would like to understand where can we get the software?

    Thks a lot
    Daniel, a new convinced CBus fan from Argentina
     
    DanielF, Jan 9, 2006
    #1
  2. DanielF

    jako

    Joined:
    Jan 31, 2005
    Messages:
    28
    Likes Received:
    0
    jako, Jan 16, 2006
    #2
  3. DanielF

    DanielF

    Joined:
    Sep 5, 2005
    Messages:
    18
    Likes Received:
    0
    Location:
    Buenos Aires, Argentina
    No so much help from the Clipsal Team...

    Thanks a lot Jako for the reply.
    I?ve got all the Clipsal software available from the download area of the Clipsal site, and more than 50K US in hardware & soft bought here in Argentina to the Clipsal Reps, but up today not a clear response if there is some interface between CBus and Crestron.

    Also, for the wireless stuff, where are the manuals ???

    Thks
    DDF

    PS: My level of fanaticism ... is decreasing ...
     
    DanielF, Jan 30, 2006
    #3
  4. DanielF

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,151
    Likes Received:
    17
    Correct me if I am wrong here but

    I sounds like you expected there to be an existing product that would allow the interface to happen. This, obviously is not always the case and hence the need for research into these products before outlaying thousands of dollars.

    I dont know if something exists and if it doesn't then you only have yourself to blame for not being able to get them together. If there is then that is great (and I hope that is the case).

    Good luck with the project

    Mick
     
    znelbok, Jan 30, 2006
    #4
  5. DanielF

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,392
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    DanielF

    I believe that Crestron systems can be interfaced to C-Bus.

    I think you need to get whatever the magic thingies are from Crestron. Exactly what part of Crestron, when, where, or how: I don't know.

    I know some of the Crestron wired screens have been hooked up to C-Bus, so I'm making a big assumption here that the wireless ones can be hooked up as well.

    I think you need to be talking to Crestron technical support.
     
    ashleigh, Jan 30, 2006
    #5
  6. DanielF

    Rossco

    Joined:
    Aug 15, 2004
    Messages:
    61
    Likes Received:
    0
    Location:
    Victoria
    c-bus to crestron

    There is a module on the crestron site thats talks to c-bus.
    Its is not to good but works.
    it doesn't go through networks so you will need a pci on each network.
    It is a good idea to pull there module apart and modify it as we have done.
    Works very well just like the c-touch screens
     
    Rossco, Jan 31, 2006
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CBus2 components in Old CBus1 networks

  2. CBUS1 versus CBUS2

  3. cbus1 5031N key input on cbus2 network

  4. Integrating C bus with crestron

  5. Integrating crestron with Cbus

  6. Upgrading Cbus1 to Cbus2

  7. Infrascan cbus2 outdoor sensor

  8. Savant, Control-4 or Crestron integration with C-Bus

Loading...