Help using Input Unit Timer Function

Discussion in 'C-Bus Wired Hardware' started by pete_s_h, Dec 7, 2020.

  1. pete_s_h

    pete_s_h

    Joined:
    Jan 5, 2010
    Messages:
    9
    Likes Received:
    0
    Location:
    Warrimgton UK
    Hi
    I thought this would be easy but cannot get it to work.
    I want to be able to turn my stair lighting on and then have it automatically switch off after 10 mins. The Help for the Unit says that I should use the Timer function in the Block Tab of the Unit. I set this as shown below and saved it to the Unit. However, the lighting does not turn itself off after the set Timer time of 10.

    [

    What am I doing wrong and how to I get the Timer Function to Work?
     
    pete_s_h, Dec 7, 2020
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Install New Unit Function

  2. Timer function with multiple blocks problem

  3. Variable Timer Function

  4. help with general input unit

  5. Toolkit Timer function changed to Custom?

  6. Using Off function for a scene trigger GA

  7. Start timer countdown after input has turned off

  8. Need help/advice on using NAC to communicate and control Fujitsu A/C's using BACnet

Loading...