Goodnight Scene

Discussion in 'General Discussion' started by EliGlenister, May 12, 2020.

  1. EliGlenister

    EliGlenister

    Joined:
    May 12, 2020
    Messages:
    1
    Likes Received:
    0
    Hi all, first time post.
    Appreciate any input!

    Existing System, C-Touch Colour, programming via PICED.

    I want to create a “goodnight” scene for a client so they can trigger it on c-touch and it will turn off certain groups after say, 90 seconds (regardless of the the current value of the groups)

    any advice? Thanks in advance.
     
    EliGlenister, May 12, 2020
    #1
    1. Advertisements

  2. EliGlenister

    GlenF

    Joined:
    Jan 22, 2006
    Messages:
    125
    Likes Received:
    0
    Hi EliGlenister,

    I do something similar and I just dim the lights over the required period (in my case 20 secs). The dimmable lights slowly reduce which is nice and the on/off lights stay on until the end of the period and then turn off.
     
    GlenF, May 12, 2020
    #2
    1. Advertisements

  3. EliGlenister

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    114
    Likes Received:
    5
    Location:
    Melbourne Victoria
    Look in the logic section of this forum, many examples on how to do many things.
    also look in the "C:\Clipsal\PICED\Projects\Examples\Logic" directory lots of examples there too.
     
    Trevor, May 13, 2020
    #3
  4. EliGlenister

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,140
    Likes Received:
    116
    Location:
    Adelaide, Australia
    This is the way to do it. It's simple, uses a normal scene and trigger, needs no logic, the dimming shows you something is going on and any non-dimmable loads turn off at the end of the ramp.
     
    Ashley, May 13, 2020
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.