Fuses / MCB's on the output of Dimmers/Relays

Discussion in 'C-Bus Wireless Hardware' started by dellboy13, Feb 25, 2015.

  1. dellboy13

    dellboy13

    Joined:
    Feb 4, 2015
    Messages:
    10
    Likes Received:
    0
    Location:
    UK
    Hi All
    I'm getting mixed information, I was told by a CBUS integrator to install 1A fuses or MCBs on all outputs of dimmer units and relays units (and I thought I read this somewhere as well) but an electrician has just told me the dimmer units have internal auto resetting fuses and you only need to install a MCB on the feed to the dimmer.

    Do I need to install fuses or MCB on the outlets????
     
    dellboy13, Feb 25, 2015
    #1
  2. dellboy13

    tsman

    Joined:
    Aug 16, 2013
    Messages:
    62
    Likes Received:
    0
    Location:
    UK
    tsman, Feb 25, 2015
    #2
  3. dellboy13

    dellboy13

    Joined:
    Feb 4, 2015
    Messages:
    10
    Likes Received:
    0
    Location:
    UK
    Thank you
     
    dellboy13, Feb 25, 2015
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CBUS with Rail Mounted Terminal Fuses

  2. Dimmers and MCB's

  3. Load Balancing across Relays & Dimmers

  4. Dimmers For Relays

  5. Quick Start Learn Mode on Dimmers & Relays

  6. Professional High powered dimmers - mcb protection

  7. Can we get the actual feed back from the C-Bus output devices ?

  8. MCB on Output side of Dimmer

Loading...