Fujitsu Aircon

Discussion in 'Infrared (NIRT, IR Reader) and CIRCA' started by dave240t, Jun 3, 2008.

  1. dave240t

    dave240t

    Joined:
    Apr 10, 2008
    Messages:
    26
    Likes Received:
    0
    Has anyone controlled a fujitsu split aircon unit before??

    I have tried all of the clipsal IR codes on CIRCA but none of them change any state on the aircon unit the unit is a 3.5hp and is over years old.

    So if any one has learn t these codes or used a fujitsu unit before of this age and how successful they were??
     
    dave240t, Jun 3, 2008
    #1
  2. dave240t

    Mr Mark

    Joined:
    Jan 27, 2006
    Messages:
    322
    Likes Received:
    5
    Location:
    FNQ
    See if you can get your hands on the IR learner (5100RP) - maybe your local Clipsal rep can help, as these codes usually work first time when learned. Don't expect the same success with Daikin though...

    Mark

    Do you have a model number for the remote?
     
    Mr Mark, Jun 3, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. AdvantageAir v. Livezi Aircon

  2. actron aircon

  3. Toshiba VRF aircon integration

  4. 5070thp to replace Fujitsu A/C wall control??

Loading...