Flashing lights

Discussion in 'General Discussion' started by electra, Feb 12, 2008.

  1. electra

    electra

    Joined:
    Apr 19, 2006
    Messages:
    2
    Likes Received:
    0
    Location:
    Cyprus
    Hi everyone
    I have a problem at one of my project that I installed C-BUS. The Lights are flashing without reason. The electrical installation very good. All the dimmable lights are without transformers There is electrical floor heating that activate by conductor for each circuit. I checked all the connections, one by one in all the panels (6 of them) I've changed the dimmer for the area that we have the flashing and we have the same problem. Is anyone have any idea why I have this problem? I'm thinking to measure the frequency and the voltage. Is that the right steps?
    Thanks
     
    electra, Feb 12, 2008
    #1
  2. electra

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    What kind of dimmers are you using? If they are *not* the Universal dimmers, then both of the mains connections to the dimmer need to be on the same phase. If not, it can cause flashing.

    Nick
     
    NickD, Feb 12, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Flashing RED LEDs when a key is pressed.

  2. Flashing Lights

  3. Flashing CBUS Data light on Relay

  4. C-Bus Sim module in Minder not flashing

  5. Battery Warning Keeps Flashing

  6. Why the neo LED flashing

  7. DSI Dimmer leds flashing

  8. Flashing Indicator On Reflection Kp

Loading...