Hi All new firmware for C-Bus Automation Controllers is available [URL='https://www.se.com/ww/en/download/document/5500SHAC_Firmware_V1.10.0/']SpaceLogic C-Bus Firmware for 5500SHAC Automation Controller | Schneider Electric (se.com)[/URL] [URL='https://www.se.com/ww/en/download/document/5500NAC_Firmware_V1.10.0/']SpaceLogic C-Bus Firmware for 5500NAC Automation Controller | Schneider Electric (se.com)[/URL] [URL='https://www.se.com/ww/en/download/document/LSS5500SHAC_Firmware_V1.10.0/']SpaceLogic C-Bus Firmware for LSS5500SHAC Automation Controller | Schneider Electric (se.com)[/URL] [URL='https://www.se.com/ww/en/download/document/LSS5500NAC_Firmware_V1.10.0/']SpaceLogic C-Bus Firmware for LSS5500NAC Automation Controller | Schneider Electric (se.com)[/URL] Change log for LSS5500NAC & LSS5500SHAC & 5500NAC & 5500SHAC C-Bus Controllers [B]Features V1.10.0 vs V1.6.0[/B] - Support for Emergency Lighting application - Creation of DALI Object IDs (for DT1 Devices) and Group Objects. - Ability to group the DALI Object IDs under “Emergency and Exit Lighting Groups”. These groups are selectively made visible for users for the Emergency and Exit Lighting tests. - Emergency and Exit Lighting Tests (function/duration test) for a “group of Devices” or “individual devices”. -Generation of the Function or Duration test report for individual devices as “Individual Report” -Generation of the Function or Duration test report for a group of devices as “Group Report” -Store history of reports for a configured period. Overwrites old reports after configured period. -Dynamic update of the group report, when a member of the Group performs a test individually. -Auto trigger of mail after test completion to the user’s mail ID. Possibility to send mail manually. -Support to configure the Site ID and Company Logo for each user, & to be printed on the reports. -Schedule Emergency and Exit Lighting Tests for the group Objects. Editable on Scheduler Page too. -Software can Sync Tag map and make object Creation for applications like Lighting, Enable, Trigger, and Emergency and Exit Lighting. Object creation for Error & measurement. -Provides ability to push the emergency Lights to REST and INHIBIT modes as per standards. -Support a Maximum of 300 Emergency Lights objects to test per Network Automation Controller (NAC) (recommended). A max of 64 Groups per NAC & 64 Objects in a Group(recommended). -Updated user Management in providing specific “Emergency and Exit Lighting Group” Access to users. -When Emergency and Exit Lights/ C-Bus DALI-2 Gateway is not connected, the test status will show “Communication Loss”. -Emergency and Exit Lighting test reports can be filtered based on the Date selection for Quick search. -Emergency and Exit Lighting application restricted for SHAC versions. -Support for Communication Loss and “Light Source Life” in reports. -EcoStruxure Building Operation (EBO) shows Units for the Measurement objects [B]Features added for security[/B] -HTTP port disable / redirect (HTTPS mode) HTTP and HTTPS enabled HTTPS only, redirect HTTP to HTTPS HTTPS only, HTTP port is disabled -FTPS Encrypted FTP -Minimum PIN is now 6 digits (for user access to Visualization) -Software Libraries are updated as a part of Cyber security compliance -Features added for extended support -Support for Modbus devices is increased to Max 10 for SHAC. -Added 28 New Modbus profiles (66 in total) -System configuration has option backup / restore -Wildcard filter for object name in Object logs -Search input in Vis. graphics -Scene tab – ordering via click on column header -Scenes - status object for value -Camera object – local / remote switching Remote camera stream is displayed when client IP is from a different sub-network than the server. -Visualization parameters – Transparent background of control elements -Drag & drop sort ordering for Schedulers, Trend logs and Vis. Structure -Tool tip improvements for readability -Password complexity improvement Applied to FTP, Remote services, Admin access, User access Uppercase letters of European languages (A through Z, with diacritic marks, Greek and Cyrillic characters) Lowercase letters of European languages (a through z, sharp-s, with diacritic marks, Greek and Cyrillic characters) Base 10 digits (0 through 9) -Pop up dialogs Enlarged for readability -Snap to grid in Graphical editor -Scalable Size control elements in visualization (Only for circular slider). -Minimum icon size to 5px -Category separation of Events in Schedulers & Trends -Improved Trend exports (Date picker) -“Emergency Exit Lighting” Page to be made visible in Frame and Link -Emergency Lighting Objects, Multi Room Audio / Media Transport Objects can be exported over BACnet and displayed on EcoStruxure Building Operation software -Function and Duration Test can be triggered from the EcoStruxure Building Operation software. -EBO will now display the measurement Values with units. [B]Bug fixes[/B] -EcoStruxure Building Operation software displays application tagnames in good readable format. -PulseCBusLevel() in NAC/AC script does alter CBus Object held in database according to actual pulse programmed -User manual is updated to provide the Correct URL for remote services -Note : Project file backed up from Latest version, after FW Downgrade to previous version will not be restored. (So, User must ensure to take project backup of old Firmware, while doing FW updates)
