Faulty when scaning network "unit not responding"

Discussion in 'General Discussion' started by haiquang8811, Jul 30, 2013.

  1. haiquang8811

    haiquang8811

    Joined:
    Jul 16, 2012
    Messages:
    2
    Likes Received:
    0
    Location:
    Vn
    Hi All,
    I am facing the problem with C-Bus network and need your help
    I have a C-Bus network with 1 Pascal Automation, 1 CNI, 1 L5504RVF, 1 5753L, 1 5034NL. I connect my PC to C-Bus Network through CNI and scan network by C-Bus Toolkit, all my units appear on network but there are 2 units: 5753L, 5034NL, it appear "Unit not responding". And i can not open or edit two these units.

    Any one has experience or a way that fix this problem.

    Thanks
     
    haiquang8811, Jul 30, 2013
    #1
  2. haiquang8811

    DarylMc

    Joined:
    Mar 24, 2006
    Messages:
    1,308
    Likes Received:
    49
    Location:
    Cleveland, QLD, Australia
    First thing to check is that you have a hardware burden plugged in.
     
    Last edited by a moderator: Jul 30, 2013
    DarylMc, Jul 30, 2013
    #2
  3. haiquang8811

    haiquang8811

    Joined:
    Jul 16, 2012
    Messages:
    2
    Likes Received:
    0
    Location:
    Vn
    Hi Dary,
    Thank you very much for your reply, i found out the problem. Because i did not enable any Burden as you say.

    Thank you.
     
    haiquang8811, Jul 31, 2013
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. New Graphic when scanning the network...

  2. How to rescue your network when all C-Bus clocks are turned off

  3. B&W Touch Screen Reboots When Scanning Network Under Toolkit 1.1.9

  4. Unit Not Responding

  5. Toolkit errors when saving to network

  6. How to re-enable network clock when unable to connect to C-BUS network

  7. Unit not responding

  8. Unit Not Responding - What to do?

Loading...