Fan Control from 5034NL

Discussion in 'C-Bus Wired Hardware' started by znelbok, Jan 16, 2021.

  1. znelbok

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,151
    Likes Received:
    17
    Hi all

    I have a 5034NL key input that for some reason I cant get to work with a fan controller. I have searched the help file, checked my other projects (none use this Key input for fan control) and I can't find anything different in the setup.

    Can this key input actually control a fan through the Fan Speed Cycle macro function or am I just chasing my tail for something that appears to be possible but is not really.

    Yes, Fan Speed Cycle selected
    Trigger and action groups created

    Thanks

    Mick

    Edit - I'm a dumbass. I missed the change in the config tab on the fan relays - Thought I had done it but I had not.

    All good now
     
    Last edited: Jan 16, 2021
    znelbok, Jan 16, 2021
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. fan control

  2. Turning a 5034NL switch into an OUTPUT UNIT!!

  3. Fan control from a single button.

  4. fan control from single button - How?

  5. Multiple fan zones from one Saturn 5 button DLT

  6. Fan Control (again) using either 3 relays or a sweep fan relay ?

  7. Sweep Fan Control from PAC?

  8. Fan speed from Thermostat to PAC?

Loading...