Ethernet question

Discussion in 'C-Bus Wired Hardware' started by Flying wheels, Oct 9, 2021.

  1. Flying wheels

    Flying wheels

    Joined:
    Jul 11, 2021
    Messages:
    7
    Likes Received:
    0
    Location:
    Kallangur
    Hi guys
    I know this is probably a really dumb question but regarding having a permanent connection to Ethernet/ internet for the app control do I need to have to have the Ethernet unit 5500cn2 ? Or can I use the wiser 5500shac . If I can use the wiser is it the same as using the 5500cn2 ? Or is it more stable ect ? Or you flat out can’t use both on the same network or it’s a waste of time. Ect. Thanks heaps
     
    Flying wheels, Oct 9, 2021
    #1
  2. Flying wheels

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    The SHAC has dual cni's built in to it. One is dedicated to SHAC functionality, the other is available as a cni for external access, which is the external RJ45 port (or usb connection). You can only have a single network connection to a cni port at one time, so if you connect directly to it you will have to disconnect to use toolkit on that port. If you connect via Cgate you can run toolkit concurrent with your own stuff.
     
    Ashley, Oct 9, 2021
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. RS232 to Ethernet adapters

  2. Ethernet access to Schedule Plus

  3. C-Touch in a Ethernet network

  4. C-Touch in an Ethernet network

  5. PAC with ethernet possible?

  6. Problem with Ethernet PCI

  7. Ethernet Over Power

  8. 5500PC question and Saturn switch question

Loading...