Energy Saving By Dimming 2x28W fluros

Discussion in 'General Discussion' started by Michaeljw84, Aug 28, 2014.

  1. Michaeljw84

    Michaeljw84

    Joined:
    Feb 15, 2013
    Messages:
    7
    Likes Received:
    0
    Location:
    Bathurst
    Hi all,

    I am trying to achieve a saving by limiting the lighting output. I have been told that (provide there is currently adequate light fittings) I can possibly drop 5% on all lighting.

    I am also of thinking of using light harvesting in some areas. (using the outside lighting to off set the lighting outputs.

    Has anyone tried to achieve anything like this in a medium sized commercial environment.

    Would you kindly point me in a good direction.

    System details 3 x Dali Gateway module system with additional relay outputs and Ctouch colour.

    Michael
     
    Michaeljw84, Aug 28, 2014
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SENPIRSS Saving Serial with New Toolkit

  2. Partname not saving to Network Unit

  3. Day Light Saving

  4. Saving display from B&W Ctouch

  5. Using CBUS wireless with energy saving Lamps.

  6. Dimmable Fluros (again)

  7. LED lighting dimming & non-dimming.

Loading...