eDLT Unit tools page

Hi All,

The dialogue in Toolkit 1.13 indicates there is a Unit Tools page on eDLTs just like DLTs.

However I have tried all the key combos I can think of to try to access it and can't get in.

The Toolkit help doesn't give any pointers I can find.

Anyone worked it out?

 

Check out this video and see how he accesses the tools page..



Looks like its hold button five left, while double pressing button 1 right..

 

It's press and hold the LHS of the bottom button and whilst holding, press the RHS of the top button. The tools page option must have been set to enabled (default) when the unit was programmed using Toolkit though.

 

Thanks peoples,

While pressing 5 Left double tap 1 right works

Much easier than unscrewing the unit pull its plug to check firmware version on units

 

Just wondering if anyone has got a copy of the Users Guide?

It is mentioned here and there but doesn't actually seem to exist.. I only got the install manual in the box...

Would be nice to give something to the customer to tell them about a few things like the tools page and ect.

J

 

C-Bus eDLT home automation wall switch functions.

Hi jboer,

We don't have an eDLT user guide yet, but we have provided quite a comprehensive list of eDLT wall switch functions on the following page, which might be helpful: http://www.cleverhome.com.au/products/Clipsal-C-Bus-eDLT-switch.shtml

As also indicated on the above page, the Tools page may be accessed by holding 5 left and the pressing 1 right once, provided that the Tools page has not been disabled in Toolkit when the eDLT was last programming using Toolkit software.