EDLT SHUTTER RELAY WIDGET NOT WORKING

Discussion in 'C-Bus Wired Hardware' started by Vijay Barthwal, Jan 30, 2019.

  1. Vijay Barthwal

    Vijay Barthwal

    Joined:
    Jan 30, 2019
    Messages:
    3
    Likes Received:
    0
    Location:
    CHANDIGARH, INDIA
    I am facing same issue with Shutter relay L5501RBCP when operates trough EDLT 5055EDL

    • "level translation" mode in Shutter relay is also enabled.
    • Fail safe is 30 second
    • Changeover delay is 0.50 sec


    when I operates same shutter relay From Neo Cbus keypad it works perfect on all Modes i.e Shutter toggle, Shutter open, shutter close

    But when I operates it from EDLT with shutter relay widget, with 2 key function, I have to press many times to operate Shutter relay. I also checked in log no command is sending on pressing button, there is n fault in button because on next page Dimmer function is on same button it works perfectly fine

    I also tried 2 key with preset function with minimum and maximum value for Close and Open Respectively, same problem is there.

    Does any one facing same issue please share the solution
     
    Vijay Barthwal, Jan 30, 2019
    #1
  2. Vijay Barthwal

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    Try changing your debounce time to 50ms.
     
    NickD, Feb 2, 2019
    #2
    cbus-ed likes this.
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-touch screen not working

  2. Auto Login not working?

  3. Using Using a Shutter Control Relay as a Change over Relay

  4. Shutter control without shutter relay.

  5. DLT changes from shutter toggle to shutter open upon saving

  6. Difference between a shutter relay and change over relay

  7. eDLT , wiser 2, shutter scenes faults

  8. C Bus Relay working but no power to unit

Loading...