EDLT Scenes Full Now What

Hey team,

We have a site with 43 blinds in it and the customer wants it broken down on his EDLT to control bays of blinds, blackout, and sun filter, with the EDLT maxing out at 8 scenes I'm not even close to making it happen, is there a way to get 10-20+ scenes accessible via an EDLT?

Any help would be much appreciated.

 

I guess that some more experienced folks here could correct me if I am wrong, however afaik you could either use some other units in the house to store scenes in their memory (e.g. other switches/bus couplers) and trigger them from eDLT, or have a logic-capable unit like PACA/Wiser/SHAC, etc. to store scenes. For instance, PACA/Wiser have a limit of 500(?) scenes.

 

Short answer is no.

Longer answer is YES but with lots of logic run from PACA/Wiser/other logic unit.

Better solution because it’s more simple and elegant IMO would be a touch screen

 

Agree create all the scenes on a shac ( or touch screen) and just trigger from the edlts.

it should be relatively quick to create all the scenes needed.

what units are controlling the blinds?

 

I was actually thinking put the screen in lieu of the eDLT at the location.