eDLT Custom Ramp Rate - Possible?

Discussion in 'General Discussion' started by Ks04, Aug 4, 2020.

  1. Ks04

    Ks04

    Joined:
    Dec 28, 2019
    Messages:
    110
    Likes Received:
    9
    Hey Guys,

    I have an eDLT which I use to control some lights which are connected via a DALI Gateway.

    I want to have a faster ramp rate than 4secs, but this seems to be the lowest value selectable in the eDLT configuration page in the C-Bus toolkit. Is there any way to adjust this down to say 1.6secs for a faster dim?

    The root of this problem is I have to set a static ramp rate on the DALI drivers so I don't get the issue with jumping light levels when live dimming, and waiting 4secs for the lights to come on in the bathroom is sometimes a drainer!
     
    Ks04, Aug 4, 2020
    #1
  2. Ks04

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,525
    Likes Received:
    173
    Location:
    Adelaide, Australia
    Cbus only has a choice of 15 different ramp rates and 4 seconds is the fastest.
     
    Ashley, Aug 4, 2020
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus Message Rate

  2. Using default Scene ramp rate

  3. Ramp time with Ramp to Level command

  4. Scan rate of PAC and C-Bus

  5. Max. ramp rate

  6. PulseCBusLevel Dual Ramp Rate Request

  7. eDLT - custom LCD colour selections

  8. Edlt custom label icon

Loading...