eDLT and Nudge

Discussion in 'C-Bus Wired Hardware' started by MHeaton, Nov 9, 2021.

  1. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    104
    Likes Received:
    1
    Location:
    London
    Hi, I am trying to implement integration with an AC unit running via TCP/IP and it would be very helpful if the eDLT could implement a nudge macro like you can do on the touch screen (i.e. add x to the current level or reduce it by x)
     
    MHeaton, Nov 9, 2021
    #1
  2. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    104
    Likes Received:
    1
    Location:
    London
    Ignore this - was meant to apply to Wiser 2....
     
    MHeaton, Nov 9, 2021
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Using Nudge in schedule?

  2. eDLT and Short Press Toggle with Long Press Start Timer

  3. eDLT mounting plate and screws

  4. eDLT and scenes issue?

  5. Toolkit 1.14.2 and eDLT Dialog

  6. EDLT and Master Off

  7. Disable nudge buttons on vertical slider

  8. eDLT Firmware Upgrade - Failed to detect an eDLT unit connected to the computer

Loading...