EDLT and Master Off

Have just exchanged a DLT for an EDLT. Previously had a Master Off function on one button of the DLT utilising a Shutter Close Function and Applying the Master Off group to the Area for each Relay/Dimmer Controller. Can anyone assist with an alternative as the EDLT does not appear to have the Shutter Close function.

 

A shutter close command is just an OFF command. Why would you be using a shutter command anyway? Just set up an OFF command.

You would, however, be much better off forgetting about the area control function and just creating a scene to perform the master off. This way you can individually control each group and the status lights will track properly.

 

Many thanks for your reply. Considered using an Off command but an Off only does not exist in the list of drop down choices in the EDLT Menus, only Off/On. Also doesn't a scene have a limit on the number of Groups in it.