Dynamic eDLT Idle Brightness.

Discussion in 'C-Bus Wired Hardware' started by breadknife, Jul 7, 2015.

  1. breadknife

    breadknife

    Joined:
    Apr 16, 2015
    Messages:
    19
    Likes Received:
    0
    Location:
    Western Australia
    Hi Peoples,
    Not sure if this is possible but thought i would ask!
    I have an eDLT in a hallway near a bedroom (glass door!) with the idle brightness set at 2% which is fine during the day as the time and outside temperature can be read easily. However this is still reasonably bright at night. I am wondering if this idle brightness can be dynamic and be written too via logic (wiser2) so that the 2% can be changed to 0% at specific times for example.
    Thanks for your help.
     
    breadknife, Jul 7, 2015
    #1
  2. breadknife

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    You sure can..

    All of the different brightness setting (indicator/screen and idle/active) can be set to follow a group address (actually each can have its own).

    Just create a group ("eg eDLT standby brightness) and set up a schedule in your wiser to set this group to a lower level when you want it.

    Nick
     
    NickD, Jul 8, 2015
    #2
  3. breadknife

    breadknife

    Joined:
    Apr 16, 2015
    Messages:
    19
    Likes Received:
    0
    Location:
    Western Australia
    That's great news! :)
    Thanks Nick , that's just opened up a whole new world of fun!
    Cheers.
     
    breadknife, Jul 8, 2015
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Toggle, retrig, toggle, idle

  2. Neo Indicator Brightness

  3. Controlling DLT screen and indicator brightness from a key?

  4. Toolkit does not remember indicator 'brightness after key pressed' setting.

  5. Screen and Indicator Brightness on DLT's

  6. DLT Indicator Brightness

  7. Setting Icon Brightness (Alpha Blend) on CTC 2

  8. Temporarily Disabling Lights and limiting max brightness?

Loading...