DLT has no led block assignment

Discussion in 'C-Bus Wired Hardware' started by muppets, Jan 3, 2009.

  1. muppets

    muppets

    Joined:
    Oct 26, 2007
    Messages:
    98
    Likes Received:
    0
    I want the led on my DLT to follow a different application/group to that which it is controlling - is this possible. Or can this only be done with the other switches? I also note the slider is following the controlled group - can this be changed via logic or any other method?
     
    muppets, Jan 3, 2009
    #1
  2. muppets

    Mark

    Joined:
    Oct 28, 2004
    Messages:
    196
    Likes Received:
    1
    Location:
    Grenoble, France
    DLT Indicator Assignment

    Hiya,

    Sorry, the indicators on the DLT are not configurable like a Neo/Saturn unit. The DLT has so many extra parameters that we just couldn't fit everything in!

    Each DLT indicator/slider is assigned too:
    1. The group attached to the diagonal/1:1 Block, if it is selected. This is the default setting, probably used 99% of the time.
    2. If the diagonal Block is not selected, the indicator will be assigned to the lowest selected Block.
    Diagonal/1:1 block is a bit of C-Bussy slang, so here's an example:
    • If you assign Key 3 to control Blocks 1 and 3, the indicator will follow the group attached to Block 3.
    • If you assign Key 3 to control Blocks 1 and 2, the indicator will follow the group attached to Block 1.

    Hopefully knowing the rules you can make them work for your scenario!

    Cheers,
    Mark.
     
    Mark, Jan 4, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Tool Kit Block Fields ReSize ?!

  2. LED Assignment on SENPIRSS Changes on its own

  3. DLT Mem Block sort

  4. Punch Down block for termination.

  5. Help ! Area Controled Relay but i need to block a group

  6. New kid on the block.....

  7. Noticing a lot of pink cable on the block

  8. The Block

Loading...