DLT backlight failures

Discussion in 'C-Bus Wired Hardware' started by Paul Shone, Sep 1, 2015.

  1. Paul Shone

    Paul Shone

    Joined:
    Feb 2, 2009
    Messages:
    40
    Likes Received:
    0
    Location:
    Warwickshire, UK
    Hi all,

    I visited a client today who has a number of DLT's (12 in total) in a mixture of 4 and 5 button forms. The installation is only just over 3yrs old, the problem is that most of the LED backlights are now only barely visible. Some are brighter than others and some are off completley despite being set on and at 100% in Toolkit.

    Also I have 4 in my own home and one of these has now failed! Has anyone else experienced this problem.

    Thanks

    Paul.
     
    Paul Shone, Sep 1, 2015
    #1
  2. Paul Shone

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    I personally have not seen or heard of this.

    I have had about 10 in my own home for about 9 years now and have not noticed any degradation in backlight brightness (mind you I don't have them running at 100% and this would increase the life).

    Interested to hear others' experience.

    Nick
     
    NickD, Oct 13, 2015
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.